How to setup the USB Port on
Epson TM-T82II USB & Ethernet Receipt Printer
The Epson TM-T82II-347 has a dual interface but it comes setup as Ethernet connection as default. Changing from Ethernet to USB can be done using the below steps
Setting up USB Port on Epson TM-T82II-347
1- Turn Printer off.
2- Hold Feed Button Down.
3- Turn Power On whilst holding Feed Button Down.
4- Wait for Print Out.
5- Press and hold Feed Button for 3 Seconds.
6- Press Feed Button quickly 3 Times then Press and Hold
until next Print Out.
7- Press Feed Button quickly 17 Times then Press and Hold
until next Print Out.
8- Press Feed Button quickly 2 Times then Press and Hold
until next Print Out.
9- Turn Printer off using the switch at the front and
then turn it back on again.
